CLASS RACER FORUM - View Single Post

kmyers · 05-25-2009, 05:53 PM

I'm installing a JW Ultra Bell on my powerglide (broke @ the Div 3 race @ Norwalk). The old bell housing is off and I'm ready to bolt the new bell on, but the instructions don't list a torque spec for the pump bolts. I called the guy who built the trans, but he thought it was 55 lbs. ft. and was told to be careful for it may strip out the threads. My 1966 Motors Manual shows 15-17 lbs. ft., which sounds loose. I removed the old bolts and they appear to have been torqued @ the 15-17 lbs. ft. Any suggestions?

05-25-2009, 05:53 PM	#1
kmyers Junior Member Join Date: Jun 2008 Location: Chillicothe, OH Posts: 97 Likes: 0 Liked 0 Times in 0 Posts	Ultra Bell help I'm installing a JW Ultra Bell on my powerglide (broke @ the Div 3 race @ Norwalk). The old bell housing is off and I'm ready to bolt the new bell on, but the instructions don't list a torque spec for the pump bolts. I called the guy who built the trans, but he thought it was 55 lbs. ft. and was told to be careful for it may strip out the threads. My 1966 Motors Manual shows 15-17 lbs. ft., which sounds loose. I removed the old bolts and they appear to have been torqued @ the 15-17 lbs. ft. Any suggestions?