CLASS RACER FORUM - View Single Post

63corvette · 01-30-2009, 09:54 AM

Just an FYI and you may be aware of this but the yokes are also made oversize and under size from std.
That is especially the case when you try to use a yoke made for a roller bearing on a bushing tail shaft.
There is a difference in size from the bushing to the roller bearing on the ID.

01-30-2009, 09:54 AM	#4
63corvette Senior Member Join Date: Mar 2007 Location: Canyon, Tx Posts: 552 Likes: 128 Liked 359 Times in 103 Posts	Re: PG &TH350 tailshaft bushings Just an FYI and you may be aware of this but the yokes are also made oversize and under size from std. That is especially the case when you try to use a yoke made for a roller bearing on a bushing tail shaft. There is a difference in size from the bushing to the roller bearing on the ID.