CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Looking for Wrist Pins (https://classracer.com/classforum/showthread.php?t=87465)

JerryHancock 05-30-2024 07:06 PM
Looking for Wrist Pins
 
Looking for a set of 876x2.250x.090 wall.need the oversized pins as the pin bores are a bit worn. Have tried Trend,Patterson, Precision and BME with no luck. Any ideas?6

FED 387 05-30-2024 10:58 PM
Re: Looking for Wrist Pins
 
I would call JE---Mahle--Manley ----Directly see if they can help you--FED 387

Rick J 05-31-2024 02:18 AM
Re: Looking for Wrist Pins
 
If no luck with the above, Precision Products in Arden, NC will make them in house to your specs.

Ralph A Powell 05-31-2024 08:42 AM
Re: Looking for Wrist Pins
 
Trend

Angelo DiTocco 05-31-2024 10:05 AM
Re: Looking for Wrist Pins
 
You could have the pins chromed to make up the differences and then hone the pin bores to the proper clearance.

pmrphil 05-31-2024 01:14 PM
Re: Looking for Wrist Pins
 
Make sure you specify either spirolox or wire locks.
As said, try Mahle or Manley

JerryHancock 06-04-2024 10:53 PM
Re: Looking for Wrist Pins
 
Thanks Class Racer. Found some 879.at Trend


All times are GMT -4. The time now is 10:43 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.