1995 Mustang headers
 

Who makes race headers for a 302 Windsor motor?

Thanks

Re: 1995 Mustang headers
 

Kooks

Re: 1995 Mustang headers
 

I looked at Kooks and the only thing i found was 4.6 and 5.0 Coyote swap headers.
Thanks

Re: 1995 Mustang headers
 

Pacesetter
https://pacesetterexhaust.com/Produc...3-3933150EDB24

https://pacesetterexhaust.com/Produc...2-7C282C36928F


BBK
https://www.bbkperformance.com/musta...ome-94-95.html

https://www.bbkperformance.com/musta...ic-94-95.html#

Like the Pacesetters better than the BBK.

Re: 1995 Mustang headers
 

Not positive, but I believe the 94-95 Mustangs can use the same headers as the earlier FOX Mustangs. No idea what your application is, but on both my 85 Mustang Stocker, and my bracket Fairmont, (302 based SBF with AFR 185 heads), I have used the 1 5/8" long tube Flowtech headers. Both are stick cars, and clear the McLeod bellhousing with no modifications.

Re: 1995 Mustang headers
 

I would try calling

Re: 1995 Mustang headers
 

Have used the Pacesetter headers since we built our car. Very pleased with them. Still look like new. The only fit issue is next to the front of the starter.

What SSDiv6 posted;
https://pacesetterexhaust.com/Produc...2-7C282C36928F

Re: 1995 Mustang headers
 

Re: 1995 Mustang headers
 

Iam building Super Stock GT 352 Cobra Jet combo. I found the Pace Setter headers shortly after posting for help. I did not know about the BBK headers. I have researched on some other forums about fitment between Fox body and SN95 with mixed results. I was thinking of going with a 13/4 header tube. Iam waiting for connecting rods and then i will begin assembling the engine. Thanks for the research and ideas,

Re: 1995 Mustang rear gearing
 

Would any of you Stock eliminator Mustang Racers with 302W mind telling me what gear you down South with a 9.0x29.5 rear tire. Appreciated Larry