CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Monocoque wheels - source for lug nut and inserts needed (https://classracer.com/classforum/showthread.php?t=80099)

Jeff Kempton 08-20-2021 09:05 PM
Monocoque wheels - source for lug nut and inserts needed
 
I have Monocoque wheels on my Stocker and plan to upgrade the studs from 7/16" to 1/2". Instead of using a conventional mag wheel nut with a shank, the wheels use an aluminum insert in the hole, and a flat faced nut. Any suggestions on where they can still be bought?

Angelo DiTocco 08-20-2021 09:12 PM
Re: Monocoque wheels - source for lug nut and inserts needed
 
Bogart acquired Monocoque's designs - give them a call. I bought a set of wheels from them to match an older pair of M's

Greg Hill 08-20-2021 09:56 PM
Re: Monocoque wheels - source for lug nut and inserts needed
 
Quote:
Originally Posted by Jeff Kempton (Post 645966)
I have Monocoque wheels on my Stocker and plan to upgrade the studs from 7/16" to 1/2". Instead of using a conventional mag wheel nut with a shank, the wheels use an aluminum insert in the hole, and a flat faced nut. Any suggestions on where they can still be bought?
Jeff, Larry Hodge will have what you need.

Jeff Kempton 09-14-2021 01:38 PM
Re: Monocoque wheels - source for lug nut and inserts needed
 
Thanks for the suggestions guys, I'm all set now.


All times are GMT -4. The time now is 11:02 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.