Reverse pattern shifter
 

I was wondering what everyone was using for a turbo 400 reverse pattern hands-free shifter.Did some searching but was curious with new options out. Its a S10 bracket racer ,currently has a Shiftnoid on a Prostick thats hit and miss working.

Re: Reverse pattern shifter
 

Would probably go with Turbo Action

Re: Reverse pattern shifter
 

I run a reverse pattern 400 with a quarter stick and Shifnoid setup. had a problem with 2-3 shift until I figured out the pressure on the rooster comb was to high, relieved some of the tension by adding a couple flat washers between valve body and detent roller spring assembly as solenoid couldn't overcome down pressure.

Re: Reverse pattern shifter
 

I had a Pro-Stick with the Shifnoid setup and struggled with it. It was shifting 1st to 3rd at times. I changed over to a Pro Ratchet with the Shifnoid setup and it worked flawlessly.

Re: Reverse pattern shifter
 

Turbo Action

Re: Reverse pattern shifter
 

One of the nicest is a Precision Performance Shifter.....or an M&M Transmission shifter....

Just saying...


Wayne

Re: Reverse pattern shifter
 

Thanks for the help guys! I almost forgot I posted this haven't got around to racing yet this year. Lots of good suggestions

Re: Reverse pattern shifter
 

M&M with air shift.....pricey but worth it. You'll spend about as much for the PPP after all upgrades.

Re: Reverse pattern shifter
 

While my first choice would be Turbo Action I’ve been happy with the PPP that came in my car and Brad (think it’s just him and his Dad that operate Precision) was very helpful in sorting out the air shifting issue I had initially. My issue with the M&M is that it looks like a borderline patent infringement on the PPP.

Re: Reverse pattern shifter
 

For some reason I was thinking you had to move the shifter over then it went ahead and shifted into third on its own.