CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Rearend height vs weight bias (https://classracer.com/classforum/showthread.php?t=78106)

3 window 12-17-2020 11:30 AM
Rearend height vs weight bias
 
Hello all, I have a couple quick questions, how much would a 2” lowering block between my rearend housing and the leaf spring affect my weight bias? Would it affect it much or no? Also any significant affect on the Caltrac operation? Thanks.

FireSale 12-17-2020 01:36 PM
Re: Rearend height vs weight bias
 
Quote:
Originally Posted by 3 window (Post 630002)
Hello all, I have a couple quick questions, how much would a 2” lowering block between my rearend housing and the leaf spring affect my weight bias? Would it affect it much or no? Also any significant affect on the Caltrac operation? Thanks.
Can't really say but 2 inches sounds like a lot. Calvert sells 1 inch blocks and plus or minus 1 inch split mono springs. People on Yellow Bullet say they broke aluminum blocks, so be careful.

SSDiv6 12-17-2020 02:52 PM
Re: Rearend height vs weight bias
 
Quote:
Originally Posted by 3 window (Post 630002)
Hello all, I have a couple quick questions, how much would a 2” lowering block between my rearend housing and the leaf spring affect my weight bias? Would it affect it much or no? Also any significant affect on the Caltrac operation? Thanks.
If possible, you should try to scale the car first and then talk to Calvert. If the car doesn't have any issues launching and you just want to lower the car for looks, it will change the CG and dynamics of the car.


All times are GMT -4. The time now is 06:54 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.