Bump steer Chevy 2
 

I was wondering if anybody has used a bump steer kit for 62-67 Chevy II. I ran across a kit that TRZ Motorsport has. I hav never really understood bump steer but hav had som people tell that they work good. Any comments would be greatly appreciated thanks

Re: Bump steer Chevy 2
 

Looks like that kit is if you are installing a pinto rack into a Chevy II. It looks like the only place a rack can be used is GT and Modified with front wheel drive conversion. I could not find anywhere in the 2020 NHRA rulebook where the rack was accepted in regular Superstock, GT and modifieds, unless originally produced with a rack like a C4 Corvette later Mustangs and so on.
Richard Doane (RIP) used to modify these for the Chevy II guys not sure who else does them now.

hope this info helps
Ernie Neal
SS 354

Re: Bump steer Chevy 2
 

PM Eddie Rezac,he's a member here.He had a kit that a lot of guys used...gsa612

Re: Bump steer Chevy 2
 

The bump steer kit says it it is used with stock steering . It says it replaces the inner and outer tie rod ends

Re: Bump steer Chevy 2
 

I don't see it there. What I do see is not going to solve the problem.
62-67's have many issues that need to be addressed.

Re: Bump steer Chevy 2
 

I've used the Global West bump steer kit on several early Deuces .
I does a great job of controlling the toe change .

Re: Bump steer Chevy 2
 

Get with Eddie Rezac!

Re: Bump steer Chevy 2
 

I also have the kit that Eddie sells on the car that we're putting together. When i talked to Eddie he told me to send the steering parts that he would need to modify and he also sent me back the new parts in addition to the parts i sent him for the kit and the directions for alignment. Kenney Kelley

Re: Bump steer Chevy 2
 

I did that with my ‘96 Firebird. Heck, everything I have raced. Even my old ‘56 Chevy, Jr Stock days.
Had to make my own parts.
Eddie is a sharp guy. I would not hesitate to buy what he offers.