CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Random tech questions (https://classracer.com/classforum/showthread.php?t=74220)

Rose Racing 09-17-2019 07:06 PM

Random tech questions
 
Can I use a poly seat in stock eliminator? and Do I have to have a radio? I would like to put a switch panel in where the radio hole is in the dash but have the radio if needed

Mark Markow 09-17-2019 07:28 PM

Re: Random tech questions
 
you're legal as long as both front seats match. . also on the radio delete / guage question

Rose Racing 09-17-2019 08:33 PM

Re: Random tech questions
 
awesome thanks

B Parker 09-17-2019 10:12 PM

Re: Random tech questions
 
On the radio only if it has an 8 track. BP

Tom Goldman 09-17-2019 10:31 PM

Re: Random tech questions
 
Male sure you keep the heater controls in place, they get upset when those are missing.
Also be sure to anchor the drivers seat back to the roll bar , if your car has one .
If your budget can stand the extra $200 bucks ,I'd go with an aluminum seat .
Weight is usually just about the same as the poly seat and much stronger and safer , in my opinion.

Bob Don 09-20-2019 04:13 PM

Re: Random tech questions
 
AM radio with reverb

Mark Yacavone 09-20-2019 06:59 PM

Re: Random tech questions
 
Quote:

Originally Posted by Tom Goldman (Post 597857)
Make sure you keep the heater controls in place, they get upset when those are missing.
.

Cut off wheel and a hot glue gun...Just sayin'

CMcAllister 09-20-2019 08:44 PM

Re: Random tech questions
 
Agreed on the aluminum seats. Huge improvement in every way over the plastic stuff, except for maybe cost.

CMcAllister 09-20-2019 08:49 PM

Re: Random tech questions
 
Quote:

Originally Posted by B Parker (Post 597856)
On the radio only if it has an 8 track. BP

I think you're required to have the matchbook and hex shaped pencil as well if running the 8-track player.

Rose Racing 09-12-2021 11:16 AM

Re: Random tech questions
 
If I get aluminum seats do I need a cover or can I run a bare aluminum seat? Im not worried about comfort... Im not racing for 500 miles.. I just think the covers they make for the aluminum kirkey or Jaz seats are extremely ugly.....


All times are GMT -4. The time now is 05:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.