CLASS RACER FORUM - Hydraulic lifter conversion recommended valve lash

CLASS RACER FORUM (https://classracer.com/classforum/index.php)

- Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)

- - Hydraulic lifter conversion recommended valve lash (https://classracer.com/classforum/showthread.php?t=72674)

stocker396

04-03-2019 05:07 PM

Hydraulic lifter conversion recommended valve lash

Just converted my old Shubecks from hydraulic to solid. Still running a hydraulic profile cam. Bullet brand cam

The question is what lash should I set it at now?

I was between .0 and .003 before

Billy Nees

04-03-2019 06:06 PM

Re: Hydraulic lifter conversion recommended valve lash

.006 and .010 works for me!

gsa612

04-03-2019 08:39 PM

Re: Hydraulic lifter conversion recommended valve lash

What was the open spring press.with the Shubecks?.If it was 400+you will not be able to run that with a uncoated solid lifter on the same cam.As far as lash .006-.008. gsa612

Rsmith38

04-04-2019 08:59 AM

Re: Hydraulic lifter conversion recommended valve lash

Call John Partridge

All times are GMT -4. The time now is 08:58 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.