CLASS RACER FORUM
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Trans shield (https://classracer.com/classforum/showthread.php?t=68488)

bolgna 12-15-2017 05:46 PM
Trans shield
 
What trans shield or blankets are people using on their copo camaros

johnk1872 12-15-2017 08:22 PM
Re: Trans shield
 
I use aTCI shield on a 350 turbo

Ed Wright 12-15-2017 09:15 PM
Re: Trans shield
 
Quote:
Originally Posted by johnk1872 (Post 551861)
I use aTCI shield on a 350 turbo
Me too. Wonder why the replacement intervals? Even if there has never been an explosion?

Bob Mulry 12-16-2017 07:48 AM
Re: Trans shield
 
Quote:
Originally Posted by Ed Wright (Post 551865)
Me too. Wonder why the replacement intervals? Even if there has never been an explosion?
$$$$$$$$$$$$$$$$$$$$$$

Maybe they wear out just like helmets and seat belts????

Just sayin'

Dan Fletcher 12-16-2017 09:03 AM
Re: Trans shield
 
Quote:
Originally Posted by johnk1872 (Post 551861)
I use aTCI shield on a 350 turbo
Obviously if you're using it then it fit, but was it close/tight? Were you able to install it with the trans in the car?

It looks like there should be plenty of room.

johnk1872 12-16-2017 09:22 AM
Re: Trans shield
 
Dan, I Use the ati bell housing and just leave the shield loose while installing fit is no problem, just have to massage trans mount/ crossmember a little and recheck driveshaft length because the bell adds about 1/2 to3/4 inch to overall length of trans

Rat Raceway 12-16-2017 03:56 PM
Re: Trans shield
 
I have been running a CSR Super Shield for 5 years. Sending it in for Re-Cert this year.
Keep in mind the bolts that come with it will not work on your LS Block.

Ed Wright 12-16-2017 04:16 PM
Re: Trans shield
 
Quote:
Originally Posted by Bob Mulry (Post 551882)
$$$$$$$$$$$$$$$$$$$$$$

Maybe they wear out just like helmets and seat belts????

Just sayin'
Yep. Generating income for sponsors.

Dan Fletcher 12-16-2017 05:01 PM
Re: Trans shield
 
Quote:
Originally Posted by johnk1872 (Post 551888)
Dan, I Use the ati bell housing and just leave the shield loose while installing fit is no problem, just have to massage trans mount/ crossmember a little and recheck driveshaft length because the bell adds about 1/2 to3/4 inch to overall length of trans
Thank you

B Parker 12-16-2017 09:28 PM
Re: Trans shield
 
Anyone having any luck with a shield for a metric 200. BP


All times are GMT -4. The time now is 08:53 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.