CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   428 ford camshaft (https://classracer.com/classforum/showthread.php?t=67059)

Glenn Briglio 08-01-2017 03:33 PM
428 ford camshaft
 
I'm doing a 428 engine for a customer.Stock rebuild for a 1968 Shelby gt500. Looking for oem lift, duration at .050on intake and exhaust and intake and exhaust centerlines for camshaft.

carl hinkson 08-01-2017 03:54 PM
Re: 428 ford camshaft
 
Quote:
Originally Posted by Glenn Briglio (Post 540724)
I'm doing a 428 engine for a customer.Stock rebuild for a 1968 Shelby gt500. Looking for oem lift, duration at .050on intake and exhaust and intake and exhaust centerlines for camshaft.

Check with Keith Craft http://www.keithcraft.com/ He can come up with those number for you.

The last one I did the lifter bores were worn out had to bush them back and when it was all said and done I went with a HYD roller this was about 5 years ago and car goes really good. It was in a Drag Pack Mustang.

Adger Smith 08-02-2017 04:01 AM
Re: 428 ford camshaft
 
Check with RJ Sledge
rj4004@yahoo.com

FED 387 08-02-2017 10:51 AM
Re: 428 ford camshaft
 
Glenn -- check your PM's-- FED 387


All times are GMT -4. The time now is 03:07 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.