CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Dana ceramic bearings (https://classracer.com/classforum/showthread.php?t=64855)

MIRADA 01-06-2017 05:31 PM

Dana ceramic bearings
 
Looking for opinions on putting ceramic bearings in my Dana and the axles.Is there a huge gain ? I mean a couple hundreds ? Which would be good , like everybody trying to scrape as much as I can off...thanks

MR DERBY CITY 01-06-2017 05:58 PM

Re: Dana ceramic bearings
 
One thing is for sure, they will deplete the checkbook in a hurry.....

MIRADA 01-06-2017 06:03 PM

Re: Dana ceramic bearings
 
Quote:

Originally Posted by MR DERBY CITY (Post 523809)
One thing is for sure, they will deplete the checkbook in a hurry.....

And I have to work in Canadian dollars .... that's why I need to be sure of the gain....lol

Hacksaw 01-06-2017 06:25 PM

Re: Dana ceramic bearings
 
I have a 9", however, the ceramic bearing supplier told me the biggest gain is on the pinion bearings. Maybe a good place to start the changeover.

V M Kauffman 01-06-2017 07:31 PM

Re: Dana ceramic bearings
 
You don't have good enough equipment to measure any if there is one improvement! We tried them in Indy car. Wheel bearings in trans axle and etc not much if anything there. Save your $$$$ invest in something else. Just not cost effective.



Quote:

Originally Posted by MIRADA (Post 523808)
Looking for opinions on putting ceramic bearings in my Dana and the axles.Is there a huge gain ? I mean a couple hundreds ? Which would be good , like everybody trying to scrape as much as I can off...thanks


Chipper Chapman 01-07-2017 12:27 AM

Re: Dana ceramic bearings
 
Ceramic bearings should be the last place you look for ET.

Tom Meyer 01-07-2017 09:36 AM

Re: Dana ceramic bearings
 
If you are maxed out on every thing else on your car there mite be a very, very, small gain not much for what you would spend. It would be better to look at polished bearings and treated ring and pinion along with a good lube and getting a lite spool and ring gear along with gun drilled axles. How you have gears set up with a little as drag a possible, it is all the little things that add up but its tuff to get there. You may not even see that on a ET slip. Tom

Crew Chief 01-07-2017 10:34 AM

Re: Dana ceramic bearings
 
Before you spend your hard earned money on "trick" parts, spend time on getting all the basics right. You will come out dollars ahead and be surprised how much ET is still left in your car.

james schaechter 01-07-2017 10:56 AM

Re: Dana ceramic bearings
 
These types of things rarely get the measure you want. I agree, it is the right course when you have everything else done and still have money. Never is just one thing though. Over time, a really trick car might have all the best stuff done and maybe is a few quicker then everyone. Just being more thoughtful about tuning and driving can make up some et for no money at all.


All times are GMT -4. The time now is 03:59 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.