MP's Final Round Dial at "the Bend"??
 

Who was there? 11.38?......huh????

Car#-Driver(Opp'nt)-RT-----ET-- Speed-----Car#-Driver(Opp'nt)-RT-----ET-- Speed
1 Myron Piatek 535 Rick Baehr
E6 0.012 11.833 109.73 ****WINNER**** 0.001 12.572 82.45
J/CM Dial: 11.38 (+/-): 0.453 G/FIA Dial: 12.35 (+/-): 0.222
Prior rounds:
E5 (J KAEKEL JR ) 0.021 11.802 0.012 0.036 12.411 0.061
E4 (M LEOPOLD ) 0.002 11.800 -0.010 (J DAY ) 0.025 12.365 0.015
E3 (N FOLK ) 0.007 11.834 0.004 (R SHAW ) 0.030 12.349 -0.001
E2 (T KNOTT ) 0.031 11.847 0.027 (C BLEZIEN ) 0.004 12.373 0.033
E1 (B GRUBBS ) 0.012 11.782 0.002 (R WILKINS ) 0.038 12.324 -0.006
Qualified: #26 11.782 -0.518 #14 12.295 -0.855

Re: MP's Final Round Dial at "the Bend"??
 

Dude save the bandwidth....its the DRIVERS responsibility to check his/her dial PERIOD!!!!!!

shooter......besides slick was .001 and hes the baddest stripe driver around right now!

Re: MP's Final Round Dial at "the Bend"??
 

Hey Scott this aint DRR! Nice job this weekend in what you did. Just remember the decimal point. I think you know where it goes. Good luck and enjoy......

Re: MP's Final Round Dial at "the Bend"??
 

The 11.38 dial had to be a misprint. Myron didnt become the world champ by not paying attention to the details. If he dialed an 83 and they put a 38 in the computer and he didnt notice, I'd be surprised. Great light by Rick. Is this the Rick Beahr that won the summit super series?

Re: MP's Final Round Dial at "the Bend"??
 

He missed it, unfortunately. That would've been a h*ll of a race.

Yup, that's the '05 Summit World Champion, Ricky Baehr... who is 28-2 in the SWC again this year! One bad dude, and a really nice guy to boot.

Re: MP's Final Round Dial at "the Bend"??
 

That just goes to prove we are all human!!

Re: MP's Final Round Dial at "the Bend"??
 

I was there, and was Rick's 4th round victim with a bye to the final and basically the iron man on the line because of the missed dial deal..........

couple of thoughts.....

1. Poor Myron! I feel terrible for him. We all know that it is our responsibility to check the boards, but, man that sucks. The final of a National event, big money and points on the line, and with him being well over a 1,000 miles from home! At least you could read Grand Bends boards well, that is more than you can say for some tracks. Still, I hope whomever put in his dial in wrong gets a good reaming. If most of us made that kind of mistake at our job there would be hell to pay.

2. Rick Baehr. Stockers beware, he is as good as advertised, and a lot more personable than I expected. I had him .003 on the tree, but as one mentioned about his stripe driving, he took it .006 on me, with a 23 MPH disadvantage at the stripe.


Jeff Day

Re: MP's Final Round Dial at "the Bend"??
 

I don't usually check the dial-in boards and didn't that time. I don't really care for the rule because I shouldn't have to make sure track officials/employees are doing their job! I'm there to race! On the other hand, we are all human and it is a good idea to look for stuff like water on the track, dial-ins, or whatever, that may have been missed.

This time, I got bit. I "probably" would have lost anyway because I ran .05 off my dial, which was 11.78. (The "7" was clearly written.) I miscalculated the weather and the engine may have been too warm after I started the car in the lanes after the long wait. The "probably" bothers me, but Rick is obviously a good racer. I'll just have to pay more attention next time.

That difference is sure gonna look bad on TV! :p

Re: MP's Final Round Dial at "the Bend"??
 

I gave you the benefit of the doubt and assumed that they just got it backwards and had it as an 11.38 instead of an 11.83, so I thought you would've been dead-on. 3's and 7's... they look pretty similar, and they're pretty close to each other on the keypad, too. :rolleyes:

But yeah, it's only been a rule to check your dial-in for a decade or two. ;)

Glad you got some sticker money, though!

Re: MP's Final Round Dial at "the Bend"??
 

I like the dial-in boards as you do the burn-out, because I will look at it then. I also like having my husband on the starting line to check for water, oil, and correct dial-ins. Once the burn out is over, I'm focused on the staging process and getting a good light. Congrats on the Runner up Myron, sorry you lost this way.