CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Racing seats (https://classracer.com/classforum/showthread.php?t=60529)

R. Thorne 12-15-2015 12:49 PM

Racing seats
 
Trying to decide on polyethylene (jegs or summit)or aluminum Kirkey style seats. Big difference in price. Are the poly seats that inferior to aluminum? There appears to be no Sema type spec on seats, so, any "aftermarket" seats are legal? Anybody have any "real world" experience with the poly seats? Thanks, Ron.

1320racer 12-15-2015 01:26 PM

Re: Racing seats
 
I prefer the Jaz aluminum seat over Kirkey.

Mickey Whaley 12-15-2015 01:30 PM

Re: Racing seats
 
kirkey just measure your azz and go a little bigger

Sean Marconette 12-15-2015 01:44 PM

Re: Racing seats
 
Ron,
You might search this topic as it was beat to death when stock was allowed to use aftermarket seats. Someone pointed out the steel inserts in the plastic seats as a concern if I recall. If you have noticed looking at the cars at the races the majority have Kirkey installed. Being able to brace the seat and also fasten it to the car favors an aluminum seat in my opinion. Due to the seat being a lot thinner compared to a factory seat, bracing will be mandatory.

Sean

CMcAllister 12-15-2015 02:42 PM

Re: Racing seats
 
This is a Chevelle with a pair of Jaz seats installed. Seat mounts are fabed out of CM tubing. They look like they're laid way back but the car owner and I both like this location for head room, leg room and distance to the pedals and wheel, comfort and vision. I like the Jaz seats, they are more compact than the Kirkey. The seat belt slots are not always in the optimum location, but having to modify that would not prevent me from using this seat. We lost about 80 pounds by replacing factory buckets and tracks with this set up.

http://classracer.com/classforum/att...1&d=1450204695

Mike Pearson 12-15-2015 02:59 PM

Re: Racing seats
 
I have the poly seats in my car. I have them through bolted and did not use the threaded inserts for mounting. They are not as pretty as the aluminum but are very comfortable and light.

Ed Wright 12-15-2015 03:03 PM

Re: Racing seats
 
Quote:

Originally Posted by Mike Pearson (Post 490341)
I have the poly seats in my car. I have them through bolted and did not use the threaded inserts for mounting. They are not as pretty as the aluminum but are very comfortable and light.

That is what I still have in mine. Through bolted as well. Much more comfortable to me, and light.

rallye bob 12-15-2015 07:03 PM

Re: Racing seats
 
I run the JAZ poly seats in my car, and have them through bolted. The back of the seats are bolted to a brace fabed off my cage. The seats are very comfortable, and rock solid.

rickseeman 12-16-2015 11:52 AM

Re: Racing seats
 
I doubt you want to spend this much but they say if you wreck, these are good


http://racetech-usa.com/shop/seats

sst7250 12-16-2015 03:03 PM

Re: Racing seats
 
If you are tall stay away from any of the poly seats. The aluminum ones give you more head room by a few inches.


All times are GMT -4. The time now is 09:14 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.