CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Springs for a 57 Chev ......................... (https://classracer.com/classforum/showthread.php?t=59608)

Wayne W 09-21-2015 09:18 PM

Springs for a 57 Chev .........................
 
Front springs for an old school 57 Chevy SS type of car. Moroso or Moog ? Does anyone have part numbers for springs that work in the front these old girls ? Thanks in advance,

dmir55 09-23-2015 10:53 PM

Re: Springs for a 57 Chev .........................
 
I do not have any numbers, but, I believe the spring you are looking for is a 1963 Buick special rear spring. You are taxing my old brain but I think this is what you are looking for. A very tightly wound spring with a lot of stored energy. We used this spring on a 1956 chev and a 1958 corvette. I hopes this helps. I am quite sure about the year, but you should check to make sure. Any spring catalog should give you the right size if I have the wrong year.

ss wannabee 09-24-2015 09:54 AM

Re: Springs for a 57 Chev .........................
 
The Moroso 47150 fits the '55-'57 Chev but also other applications...think the Camaro
and maybe Chevelle...

They might work right out of the box...but you may have to trim them a bit...to get what
you're looking for...(ride height, etc...)

Think that many, many years ago...before Moroso sold these...guys were using front
springs from an early Chevelle listing...thought I saw that once in a '55-'57 build
in a magazine.....

Ed Wright 09-24-2015 05:03 PM

Re: Springs for a 57 Chev .........................
 
I used '64 Chevelle, 6 Cyl 2dr sedan front springs in my old '56 Chevy Jr Stocker. Longer @ wound from much smaller wire than the originals. Moroso came out with their springs several years later. Moog had a catalog listing coils by wire dia, coil dia, length and spring rate. My first set came from an auto salvage.

Ed Wright 09-24-2015 05:10 PM

Re: Springs for a 57 Chev .........................
 
Sorry. Not sure how I did this twice. Would delete this if I could.

NHRA 303 09-25-2015 01:33 PM

Re: Springs for a 57 Chev .........................
 
Hi Wayne. Have you looked at Calvert's stuff. They do carry them for your '57. They come in three different (loered) ride heights. They are a little pricey tho. But what isnt in this sport right....
Steve
http://www.calvertracing.com/store/m...ring-p-60.html

Wayne W 10-03-2015 08:13 AM

Re: Springs for a 57 Chev .........................
 
Thanks to all. You have been a great help.


All times are GMT -4. The time now is 12:42 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.