carb air entry pan for the Super 10
 

is this Quick Fuel air bell a legal SS part?

http://www.quickfueltechnology.com/s...150-style.html

Re: carb air entry pan for the Super 10
 

It's not legal.
The air cleaner rule you have to follow is the same as for Super Stock class.

AIR CLEANERS
Optional. If used, air cleaner must be OEM automotive or retain
OEM configuration. Air-cleaner base may be cut or trimmed, but
welding, bolting, riveting, epoxying, or any other form of fabrication
prohibited. Ram tubes, velocity stacks, or other than stock-type
base plates or ducting prohibited. Cooling holes prohibited in
radiator side panels, etc. Factory air cleaners and/or scoops that fit
through hood must be affixed to carburetor as per OEM only.

Re: carb air entry pan for the Super 10
 

X2,,, that's basically a velocity stack you're looking at, Larry.
Danny Durham

Re: carb air entry pan for the Super 10
 

Larry…Classic Industries Part number C695, should keep you out of trouble. MB.

Re: carb air entry pan for the Super 10
 

Maurice,

Thanks, I need a non trouble situation :)

Re: carb air entry pan for the Super 10
 

Larry,
Not sure exactly what you are wanting but if you need an air cleaner base, then check out Speedway Motors' #91011062-2. At only $14.99 you can't go wrong. This is what I used to recommend to my carb customers when they asked about air cleaner bases. They also offer it with a top if you want to run a filter, #91011000. It comes with your choice if spacer 1/2, 1, or 2 inch and a stud. Hope this helps. Regards, Danny

Re: carb air entry pan for the Super 10
 

Legal? http://www.r2cperformance.com/produc...?ProductId=264
http://www.speedwaymotors.com/R2C-Pe...-14,70686.html

Re: carb air entry pan for the Super 10
 

I think tech. would consider that base the same as they do a K&N Stub Stack. -Al

Re: carb air entry pan for the Super 10
 

How about this version? These folks are supposedly working on Quadrajet parts as well.

http://i434.photobucket.com/albums/q...pslylzxdma.jpg

Re: carb air entry pan for the Super 10
 

Danny Ashley,

Thanks, I still remember the very good Q-jet you did for me about 8 - 9 years ago. That carb worked great on our 350/255 F/SA Nova.

And about the air pan base, simply looking at something to potentially smooth out air flow. I will check your suggested links.

The combination I have now is SS 327/300/293 with Quick Fuel SS585 replacement carb.