CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   What would it take? (https://classracer.com/classforum/showthread.php?t=56685)

jamie2370 02-02-2015 09:21 AM

What would it take?
 
SBC 350/255 to run 10.70's in G
How much HP or what is the most HP one has made?

LOL, I'm bored at work

HR9121 02-02-2015 12:50 PM

Re: What would it take?
 
Jamie my guess is it would take about 20 grand lol, hope this helps!

jamie2370 02-02-2015 02:32 PM

Re: What would it take?
 
LOL, You are dead on about the money figure:)

Dave Ribeiro 02-02-2015 05:15 PM

Re: What would it take?
 
Jamie / HR9121,


More like $ 13-15K if you have cores ? That's not a cheap combo to build.
Good Luck & take your Time , you can still have Fun & Win going 5-6 under !!!

jamie2370 02-02-2015 05:41 PM

Re: What would it take?
 
Dave, It was a Hypothetical question. I have a 85 camaro with a little 305/263. I hope to make it 5-6 under, LOL.

NHRA 303 02-02-2015 06:22 PM

Re: What would it take?
 
This is one of my favorite web sites. Ive killed hours playing on it. Everything is pretty much spot on. Except the ".Compute ideal MPH and times at 60', 330', 660' and 1000'. They wont match your cars times for some reason. But they are proportionally correct.
The "ET - MPH - HP Calculators" in the first column. And the 'Gears - Tire - RPM Calculators' at the top of the second column are my favorites.
Hope this helps.
Steve-o-
http://www.wallaceracing.com/Calculators.htm

Chipper Chapman 02-02-2015 11:59 PM

Re: What would it take?
 
Basing it off my car (chevelle with 255/280 in h)

Went 11.66 at 3405, with 384 flywheel hp.

-140 lbs for to go to safe g weight = an approximate 11.52

so thats about .80 required to go 10.70's

at roughly 10hp per tenth like a slide rule calculator, you'd need 450-460hp.

Correct me if i'm wrong. And yes my car is a slug, but we're working at it! lol

Gary Parker 02-03-2015 06:39 AM

Re: What would it take?
 
It's more than just horsepower. Without the right headers, converter, ignition, and carb. Also the car has to leave the starting line hard. Two cars with the same horsepower, will run different times. It's the whole combo and how good one is at making it run. But like has been said on here, bring your wallet.

HR9121 02-03-2015 11:08 AM

Re: What would it take?
 
Quote:

Originally Posted by Gary Parker (Post 460736)
It's more than just horsepower. Without the right headers, converter, ignition, and carb. Also the car has to leave the starting line hard. Two cars with the same horsepower, will run different times. It's the whole combo and how good one is at making it run. But like has been said on here, bring your wallet.

Hey Dave, this is why I said 20k lol. I'll stick with my 350/268 though Jamie too many rocket ships in G and H! Think I will hang out in I and J.

jamie2370 02-03-2015 11:22 AM

Re: What would it take?
 
Cooter, looking at Div 2 qualifying history on DRC, You can go to J and be clear and free and I may end up in G. Most of the cars I am avoiding stay in H . There was average around 5 I cars most being 80 under camaros, adkinson is in I and slowest I car was 79 under at most races.


All times are GMT -4. The time now is 12:33 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.