Question about pinned wheels
 

Looking at a set of Weld Pro Star wheels for sale that have been drilled front/rear for bead screws. Will there be issues with leaking air using them without screws with new tires?

Re: Question about pinned wheels
 

I would say no. The new tires will seal the screw holes.
Dan

Re: Question about pinned wheels
 

I have seen it happen if they are drilled to close to the bead. Just fill the hole with epoxy from the back side before you mount the tires. My rears are drilled and I never have had an issue.

Re: Question about pinned wheels
 

As posted above, leaking is possible depending on the hole location. I once filled a set of drilled wheels with JB Weld. Used masking tape over the inside of hole, carefully filled holes, let set overnight, re-installed tires.

Worked for years with no problem.

Re: Question about pinned wheels
 

Thanks guys - I think I'll pass on these and just keep looking.

Re: Question about pinned wheels
 

Probably a good move if they aren't a real cheap price.