CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Metric 200 fluid level (https://classracer.com/classforum/showthread.php?t=53061)

Chris Hall 05-12-2014 03:38 PM
Metric 200 fluid level
 
When measuring from the trans pan flange, what trans fluid level is best with a Metric 200 with a deep pan?

Jim Kaekel 05-12-2014 03:45 PM
Re: Metric 200 fluid level
 
See Tech Tip #12 on the Turbo Action web site under Tech Tips. There is a full explanation.

ss3011 05-12-2014 04:16 PM
Re: Metric 200 fluid level
 
The factory oil level is, full hot even with the pan gasket.

Greg Hill 05-12-2014 04:48 PM
Re: Metric 200 fluid level
 
I always run ours about 1 qt. low when cold. That equates to about 1/2 qt. low when hot. Those things are bad about puking fluid out if they are full.

G Anderson 05-12-2014 07:16 PM
Re: Metric 200 fluid level
 
Quote:
Originally Posted by Jim Kaekel (Post 431255)
See Tech Tip #12 on the Turbo Action web site under Tech Tips. There is a full explanation.
I got on the T-A web site and it calls for about 5/16" down from the pan rail and it says you might have to remark aftermarket dip sticks"this would explain why my 2 dipsticks have different levels" Thanks for the info Jim Kaekel !!!

Chris Hall 05-14-2014 12:12 AM
Re: Metric 200 fluid level
 
Thanks for the info! I'm just trying to get my pile to be a little more efficient


All times are GMT -4. The time now is 06:31 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.