CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Cranks ? (https://classracer.com/classforum/showthread.php?t=52741)

Johnny Rod 04-21-2014 10:20 AM

Cranks ?
 
Who sells a replacement crank for super stock. 327ci . I read it on here but can not find it.

FireSale 04-21-2014 11:08 AM

Re: Cranks ?
 
The rules say OEM or Accepted aftermarket crank only. Problem is, NHRA lists no aftermarket crank for the 327 Chevy. I'm a ford guy. so that's an assumption.

Technically, there are no aftermarket cranks for any Super Stocks as the list reads Stock Eliminator Aftermarket Cranks. For rods it separates Stock and Super Stock.

The list is a bit of a joke. The only listed crank for my 302 Ford is an Eagle part that hasn't been made in 9 years. Eagle has submitted the replacement for approval several times but nothing happens. I just went with a forged crank that matched stock weight and specs. I'll plead dumb if they say anything.

Dale

Rat Raceway 04-21-2014 11:31 AM

Re: Cranks ?
 
Quote:

Originally Posted by FireSail (Post 428603)
The rules say OEM or Accepted aftermarket crank only. Problem is, NHRA lists no aftermarket crank for the 327 Chevy. I'm a ford guy. so that's an assumption.

Technically, there are no aftermarket cranks for any Super Stocks as the list reads Stock Eliminator Aftermarket Cranks. For rods it separates Stock and Super Stock.

The list is a bit of a joke. The only listed crank for my 302 Ford is an Eagle part that hasn't been made in 9 years. Eagle has submitted the replacement for approval several times but nothing happens. I just went with a forged crank that matched stock weight and specs. I'll plead dumb if they say anything.

Dale

Its a little work but nothing crazy to get a crank approved. I got one approved for this year.

Fill this out add pictures and you should be there as long as all spec's are correct.
http://www.nhra.com/userfiles/file/A...val%20Form.pdf


Info
http://www.nhra.com/userfiles/file/N...%20Process.pdf

Johnny Rod 04-21-2014 11:34 AM

Re: Cranks ?
 
Thanks Dale, I called Callies they said they have a steel one that's on the list. $$$$$ ouch!

FireSale 04-21-2014 11:37 AM

Re: Cranks ?
 
Quote:

Originally Posted by Rat Raceway (Post 428609)
Its a little work but nothing crazy to get a crank approved. I got one approved for this year.

Fill this out add pictures and you should be there as long as all spec's are correct.
http://www.nhra.com/userfiles/file/A...val%20Form.pdf


Info
http://www.nhra.com/userfiles/file/N...%20Process.pdf

Thanks. I saw that form and thought it was corporate, not personal. I get my crank back from the balancer today or tomorrow and I'll take photos to submit.

Thanks again.

Dale

Chad Rhodes 04-21-2014 11:40 AM

Re: Cranks ?
 
Quote:

Originally Posted by Johnny Rod (Post 428611)
Thanks Dale, I called Callies they said they have a steel one that's on the list. $$$$$ ouch!

give me the part number and I can probably beat the price

Alan Roehrich 04-21-2014 06:54 PM

Re: Cranks ?
 
In Super Stock, the rules stated it could not be billet (the forging line had to be visible, at least on the flange), and the counterweights could not be knife edged. They may have changed when aftermarket crankshafts were allowed in Stock.

You'll be hard pressed to find a small journal 3.25" stroke crank for anything close to a reasonable price.

Johnny Rod 04-22-2014 08:42 AM

Re: Cranks ?
 
Chad you have a PM. Your right Alan just have to save up and take my time.

nhramnl 04-22-2014 09:23 AM

Re: Cranks ?
 
I have a standard/standard, small journal, 3.25 steel crank that I would be willing to sell. If you're interested, send your phone number and I'll call you.


All times are GMT -4. The time now is 01:38 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.