Cross member 4sp Jerico in 67 Camaro??
 

Hey guy's...question for you blokes running Stockers with a 4sp Jerico in a 1st gen Camaro...I've got a 67 Camaro and I'm fitting a DR4-4 Jerico...I've purchased the factory 4 speed cross member from Classic Industries but with a factory rubber GM trans mount it sits the transmission way to high in the tunnel...what do you guy's use for a cross member and trans mount when running a Jerico or is a custom cross member the only option??

Thanks in advance,
Ross.

Re: Cross member 4sp Jerico in 67 Camaro??
 

My 67 camaro with a Jerico trans. has a custom crossmember. Not sure how much different it is as far as height from a stock crossmember. Never had a stock one in the car.

Re: Cross member 4sp Jerico in 67 Camaro??
 

Had to cut & re-weld the "saddle" or "mount" on the cross member in my Chevelle in order to lower the angle of the transmission to the rear end.

Re: Cross member 4sp Jerico in 67 Camaro??
 

The Jerico DR4 was a bolt-in for my 66 A body, except that I trimmed down a couple ribs on the top cover for more clearance to the hump.