Stocker heads
 

I got an earful at the last divisional. Can't sort out what's true or false. Heads are limited to 3 angle cut? It doesn't make any difference what is done the ports or bowls providing that the intake and exhaust runners are the factory volume? I have a set of virgin heads and want to get them done for next year. I would like to know my options before I just drop off the heads. These are for a sb Mopar. Thanks

Re: Stocker heads
 

PM sent

Re: Stocker heads
 

Even though the rulebook plainly says, "Any valve job permitted?"

Re: Stocker heads
 

These two mopar racers do a good job, Marlin and Dave Bogner.

http://www.bognerauto.com/

Re: Stocker heads
 

You should probably call Don Little. And no, we are not limited to a three angle valve job any longer, that rule went away at least 2-3 years back. Do you not have a new rule book?

Re: Stocker heads
 

I cant stress this enough. Call your tech guy, the one who does the teardowns, ask him specifically what is going to pass IN YOUR DIVISION. You'll be much happier when that fateful day comes......

Get good advice, apply good advice and you'll be fine.

Wade

Re: Stocker heads
 

x2

Re: Stocker heads
 

Brad Van Lant