A couple videos for my fellow stick racers
 

The Nova this weekend. First pass was a 9.53 , second a 9.51
Nash 5 speed

http://www.youtube.com/watch?v=EeHwn...ature=youtu.be

http://www.youtube.com/watch?v=OOg0E...ature=youtu.be

Re: A couple videos for my fellow stick racers
 

NICE!!!!!
I'm a FORD guy, but that car is BAD *****...
That a NASH 5-speed?? I just got one for my car..

Re: A couple videos for my fellow stick racers
 

Yes

Re: A couple videos for my fellow stick racers
 

Like the car.
Was I seeing things or was car rolling in beams both passes?
Where are you located I noticed UMTR sticker

Mike Taylor 3601

Re: A couple videos for my fellow stick racers
 

No , I was using a pro tree. My lights were not "stellar" on those 2 passes ........an .097 and an .077.
Ga.
Video is a great aide , isnt it. The first thing I notice is the bump valving is too stiff , rebound on driver side also. I'll change those and see what happens.

Re: A couple videos for my fellow stick racers
 

Is that NASH pro shift or face plate?? Sound like it shifts real good...
Mine has 1-2 pro shift / 3-4-5 face plate....

Re: A couple videos for my fellow stick racers
 

All face plates. At one time or another I think I've replaced ( broken )almost everything in the trans...............including a case.
Face plating was the best thing I did.

Re: A couple videos for my fellow stick racers
 

Your making way more horsepower then me!!! I make about 400-415hp not to bad for a inline 6...
What's your car weight and what first gear ratio is in the trans???

Re: A couple videos for my fellow stick racers
 

The car weight is 3000 w/ dr. 3.05 1st .......also........
Engine is 355 , stock block , 23 degree head ( std. port )
Power is probably around 635 - 640

Re: A couple videos for my fellow stick racers
 

Mine is 2800 w/dr, the trans came with 3:25, but I have a 3:05 for it..
The engine is a destroked 300 (272ci) inline 6 Ford (400-415hp) depending carburetor set-up...
My best ET 10.96@120 multi carburetors and 11.14@118 single 4 barrel...