4GC Air Cleaner base
 

Where can I get a 4GC air cleaner base like this? Thanks

http://i244.photobucket.com/albums/g...ps543eaf64.jpg

Re: 4GC Air Cleaner base
 

If that one is off of normans car it was fab up by patterson. If you look it is two pieces put together. If I remember right if you get a quadrajet from a pontiac then adapt it to the 4gc opening. Tom

Re: 4GC Air Cleaner base
 

Ed... That is the standard base from an OEM open element HP air filter assembly. It came on Quadrajet and Holley performance applications 1966-69. Someone has done a clean job of making it work with the 4GC, adapter ring and fuel inlet tube. You most likely will have to make your own from the picture. If you need a base, try Corvette Central or Classic Industries. I hope this helps.

Re: 4GC Air Cleaner base
 

Re: 4GC Air Cleaner base
 

All I know is that if it not a factory air cleaner base,it can not be higher than the choke horn (meaning if you put a strait edge cross it,the choke horn has to hit it.) had to take it off in the 4th round after they saw it when I was getting fuel checked, another UN-written rule,that was in stock

for super stock
AIR CLEANERS
Optional. If used, air cleaner must be OEM automotive or retain
OEM configuration. Air-cleaner base may be cut or trimmed, but
welding, bolting, riveting, epoxying, or any other form of fabrication
prohibited. Ram tubes, velocity stacks, or other than stock-type
base plates or ducting prohibited. Cooling holes prohibited in
radiator side panels, etc. Factory air cleaners and/or scoops that fit
through hood must be affixed to carburetor as per OEM only.

Re: 4GC Air Cleaner base
 

EBAY....item # 230835819406

It is a modified one of these......


D L Rambo......Stk 1300

Re: 4GC Air Cleaner base
 

Thanks I appreciate it.

Re: 4GC Air Cleaner base
 

Try this one : ebay # 130821984840

Re: 4GC Air Cleaner base
 

What is particularly appealing about this base?

Ed

Re: 4GC Air Cleaner base
 

Was worth a couple hundredths on my old 250 HP 327" '65 Chevelle convert.