CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Canted valve SBC heads (https://classracer.com/classforum/showthread.php?t=36484)

Pat Cook 10-06-2011 12:14 AM
Canted valve SBC heads
 
3 Attachment(s)
Can anybody tell me who make these heads?

396chevy 10-06-2011 08:18 AM
Re: Canted valve SBC heads
 
Quote:
Originally Posted by Pat Cook (Post 286444)
Can anybody tell me who make these heads?
Trick-flow (sold thru summit) had heads that resembled these several years ago called "twisted wedge"

Eddies66 10-06-2011 09:00 AM
Re: Canted valve SBC heads
 
Over on the Chevelle formun there is a little more info on them and there is a stud girdle by JOMAR Performance. Only limiting factor is that you will need to run flat top pistons or special order a domed. They do have 2.02 intakes whicj I think for Rick's build is all he needs.

http://www.chevelles.com/forums/showthread.php?t=17310

Pat Cook 10-06-2011 11:41 AM
Re: Canted valve SBC heads
 
After the heads were removed the 400 shrank to a .030 over 350. Oops....

Thanks for the feedback.

Eddies66 10-06-2011 12:55 PM
Re: Canted valve SBC heads
 
Quote:
Originally Posted by Pat Cook (Post 286493)
After the heads were removed the 400 shrank to a .030 over 350. Oops....

Thanks for the feedback.
Put a 400 crank in it and make it a 383! You must have left it in the rain for it to shrink that small!

L78 Nova 10-06-2011 01:41 PM
Re: Canted valve SBC heads
 
Had a 350 that shrink to a 307 like that one time....


All times are GMT -4. The time now is 06:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.