Plug wires for LS1?
 

What are the best plug wires for an LS1 setup?
I'm using MSD's now and they are 4 years old. They don't see any header/exhaust heat.
Thanks.

Re: Plug wires for LS1?
 

www.customwiresets.com These are great wires.

Re: Plug wires for LS1?
 

Art,
What is the Ohms resistance per inch on the wires you are using?
What should the ohms resistance be for wires used with the LS-1 coils??
Are the LS-1 wires a lot shorter than yours?
I think I'm reading your mind on this.

Re: Plug wires for LS1?
 

Hi Adger. I'm using msd LS1 wires now. They are about 9 inches long each. When I ohm tested them 3 are 28 ohms and one is 26 ohms.
The coils seem to check out fine. A bright blue spark in the coil tester (through the wires).
I just checked the fuel injectors and they are all firing.
I might try to adjust the coil dwell, and see if that makes any difference. But it ran this way for 2 years.
If you are reading my mind now I'm sure you are hearing words you might have never heard. LOL

Here is a picture of the coils and plug wires. I was wondering if the bend they make could have a bad effect on them and not show when they were straight?

http://i203.photobucket.com/albums/aa12/rt1092/003.jpg

Re: Plug wires for LS1?
 

x2

Re: Plug wires for LS1?
 

MSD still the best.Watch ultra low ohm wires.With stock ecm's and some data loggers we have seen problems,they act like a old solid core wre.

Kevin