CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   V-10 Drag Pak Challenger help (https://classracer.com/classforum/showthread.php?t=36237)

rickseeman 09-23-2011 05:04 PM

V-10 Drag Pak Challenger help
 
Can we have a V-10 Drag Pak Challenger thread? I bought one of these and the owners manual is one paragraph long. I think I need more info than that. Tire pressure? Radial slicks or wrinkle wall? Shock settings? Fuel? I'm sure we have lots of questions. I've ran mine 3 times but I don't know if I am doing things right. Here's what I have done. Hoosier D05's screwed to wheel, 11 psi, C-12, launch at 1800, shift at 6900. So far I've got 6.15, 1.38, 114+ mph. It spins alot but I figured that was 800 HP and a 9" tire. Are radials better? I thought radials want to dead hook and I didn't think it would do that with 800 HP so I put on the wrinkle walls. I hope we can help each other.

Jeff Lee 09-23-2011 05:46 PM

Re: V-10 Drag Pak Challenger help
 
Really? :rolleyes: :D

rickseeman 09-24-2011 01:05 PM

Re: V-10 Drag Pak Challenger help
 
Perhaps I should have mentioned I'm a bracket racer since it seems some class racers are not fond of these.

Jeff Lee 09-24-2011 01:55 PM

Re: V-10 Drag Pak Challenger help
 
I shouldn't have been rude about it. But the idea that anybody can go buy a car with such obviously limited experience in class racing or class racing set-up experience and trounce competitors that have given their life in blood, sweat & tears over might make you see the issue. It's nothing personal, just mis-direction on the part of the sanctioning body.

rickseeman 09-24-2011 02:35 PM

Re: V-10 Drag Pak Challenger help
 
I'm not a class racer. I race local bracket races. I love cars. I love factory drag cars. I find these new factory drag cars fascinating as I did my 1965 Super Stock Dodge and my 1968 Race Hemi Dart. I'm just glad to see the factorys providing us with these new cars to enjoy. When I was young a Pro Stocker could run high nines. Now you can go down to the local Dodge or Ford dealer and haul off a new car off that will run faster than that off the showroom floor. Who would have thought we would ever get here? All these people talking about the good old days haven't been down to the local dealer. The good old days are today. Going to the bracket races tonight. Probably lose first round, but I will have fun.

Peter Ash 09-24-2011 03:41 PM

Re: V-10 Drag Pak Challenger help
 
Rick

See pm.

mtkawboy 09-24-2011 06:57 PM

Re: V-10 Drag Pak Challenger help
 
These would be the good old $100,000 car days then right ?

rickseeman 09-25-2011 11:53 AM

Re: V-10 Drag Pak Challenger help
 
Yes, much easier for me to get a $97,000 home equity loan now at age 55 than to come up with $5,000 cash in 1968 for a Dart when I was age 12.

340Cuda 09-25-2011 12:07 PM

Re: V-10 Drag Pak Challenger help
 
Rick,

In spite of the anger and jealousy that may be displayed, there are some good knowledgeable folks here that will give you some help with your new car.

While I have never even seen one of these cars I don’t think radials would be the way to go in bracket racing. Can you get any larger tire on it?

You have a really cool car I hope you enjoy it.

Good Luck,
Bill Lamb

rickseeman 09-25-2011 07:05 PM

Re: V-10 Drag Pak Challenger help
 
Thanks. It's really tight under there. I don't think I can get more tire under it.


All times are GMT -4. The time now is 06:27 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.