CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Brake Pressure Gauge Installation Question (https://classracer.com/classforum/showthread.php?t=28144)

Rob Petrie E395 09-02-2010 07:42 PM
Re: Brake Pressure Gauge Installation Question
 
I got a Tee from autometer with mine. one part of the tee threads onto the gauge,one part of the tee has a bleeder screw on it and the third is made to attach a brake line to it.
Hope this helps
Rob

Goto Autometer site and look up gauge 4426 and click on the instructions and it shows a nice picture of the tee.

chevy 68 09-02-2010 08:59 PM
Brake Pressure Gauge Installation Question
 
I assume you would just tee in the line, but how do I bleed the air from the line to the brake pressure gauge? Any help would be appreciated. Thanks.

Whalen3186 09-03-2010 11:30 PM
Re: Brake Pressure Gauge Installation Question
 
I bled mine right at the back of the gauge.

Mike Delahanty 09-04-2010 08:34 PM
Re: Brake Pressure Gauge Installation Question
 
1 Attachment(s)
See the attached photo. I used a vacuum bleeder to help bleed the line up to that point at the guage. Less messy too.


All times are GMT -4. The time now is 02:42 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.