CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Mufflers (https://classracer.com/classforum/showthread.php?t=27221)

GTO/GN 07-23-2010 06:27 AM

Mufflers
 
Looking to run mufflers and I see the type that bolt right to the collector with a turn down. Can't find anything in Jeggs and only one brand in Summit, from a company called Car Chemistry. Anyone know another brand or recommend a brand.. I am running a 3" system with a X pipe back to two single chamber Flowmasters that end just before the rear axle.. looking to save a little weight by losing the exhaust system.

Greg Hill 07-23-2010 07:48 AM

Re: Mufflers
 
Why are you asking about mufflers on a stock and super stock web site?

GTO/GN 07-23-2010 08:43 AM

Re: Mufflers
 
Because if any body on the planet would know of a trick setup it would be a stock racer. Sorry if I brother you..

Eric Merryfield 07-23-2010 09:01 AM

Re: Mufflers
 
Quote:

Originally Posted by GTO/GN (Post 199923)
Because if any body on the planet would know of a trick setup it would be a stock racer. Sorry if I brother you..

Well I too couldn't find what you are looking for for my 70 challenger that was affordable and not a cherry bomb muffler. You could do what I did, Just put the turndown piece on the outlet of your muffler and run as short a pipe in the front as practical. Of course you allready know that what you loose in weight, you may give up in ET if you have it optimally tuned now. You may be tweaking (the length) it for a while. Single stage flowmasters are used by most in IHRA pure stock so you should be good there.

If you don't need an exhaust at all, look into the header inserts they qualify as "mufflers"

My car picked up MPH and ET with the mufflers......dynomax street legal round 3.5 mated to the 3.5 outlet from the headers.

Eric

Geerhead55 07-23-2010 02:38 PM

Re: Mufflers
 
GTO/GN,,,, Sorry for the ball busting on here that some of these guys do. Its a simple question thats being asked,,so give the guy a break.
What I did on my car, which has a 3" collector also, was that I picked up a pair of the Flowmaster round race mufflers as seen in the Jegs catalog. I had header extentions already on the car,,so I unbolted them, and the mufflers slid right in and we welded a bead around them. So far,,so good. They don't really quiet it down a whole lot, but I complied with our local track which asked us to do this. The car didn't slow down either.
No,,its not a stocker,,,so don't fry me either, guys.
Take care,,good luck,,,,,,Danny Durham


All times are GMT -4. The time now is 11:11 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.