CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Pinion angle (https://classracer.com/classforum/showthread.php?t=26441)

Lonnie Cox 06-15-2010 11:17 PM
Pinion angle
 
Hey guys
I am building a 76 camaro, K/SA 350cid,turbo 350 275 1st,10 bolt with 4.56 gears,stock springs,should weigh 3775, what should my pinion angle be,
Thank You for your help
Lonnie

greg fulk 06-16-2010 12:08 AM
Re: Pinion angle
 
-2 degrees( that's a ballpark figure). you running "slapper bars" or Cal-Tracks? also what size tire you going to run?

Billy Nees 06-16-2010 06:21 AM
Re: Pinion angle
 
If you're using regular "slapper" bars you're going to want more than 2 degrees with that much gear and that much weight. I'd try about 6 degrees! You can better control your angle with a "cal-trac".

Lonnie Cox 06-16-2010 08:39 AM
Re: Pinion angle
 
Tire is a 30 tall,cal tracs some day .
Thank You for your help

Alan Roehrich 06-16-2010 09:13 AM
Re: Pinion angle
 
Don't wait, get the CalTracs ASAP. Buy the springs, too. Fighting a car that doesn't work well is far worse than fighting a car that is a little down on power.


All times are GMT -4. The time now is 10:25 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.