Phoenix slicks
 

Anyone run these on a stickshift. I'm curious to find out. We will be running my Dads 67 camaro this year and the 28.5 x 9 x 15 looks like the only thing that will fit under it without cutting the quarters. I have always ran the Mickey Thompson's stiff sidewall ,but unfotunatley the size we need is not there. Lmk thanks.

Re: Phoenix slicks
 

Okay let me ask this has anyone bought a set of mickeys latley 29.5x9x15s my new ones measure one inch bigger than my old ones its almost like they are miss marked??

I know the set I bought a year ago would have fit on here ,but this new set is huge?

Re: Phoenix slicks
 

Tim,
Send BFXJason a PM over on the UMTR forum. Jason works for M/T and is a straight shooter. If something is different or got changed he would be the one to ask.

Re: Phoenix slicks
 

If you buy a Phoenix tire check the oil in your air compressor regularly and don't leave it in the trailer unattended over 3 days they will be flat.......love to race them......hate to own them.......who wants a tire that will not hold air

Re: Phoenix slicks
 

Rusty

Bias tires, yes they will leak, even M/T bias leaked, the Radial's never leaked.


Brian

Re: Phoenix slicks
 

Extra measures have been taken this past year to limit the air leakage when running Phoenix Tires tubeless with very good success. All of last year production and from now on will include this extra measure.

Thanks
Mike C

Re: Phoenix slicks
 

Thats good to know as i was thinking of trying a set of those on my stock wheelwell 69. i guess we have to go with the hoosier as they seem to be the only one that offers a true 29" tire but even the 29x11.5 street pros i was runing started coming at 93-94 so i went to their 10x29 slick that was a hair shorter.

Re: Phoenix slicks
 

X2 on what Mike says...I bought 2 sets about 14 months ago and both sets,9x30x15 F9 compound,have over 85 passes on each set,car runs 10.30's at 130 mph and still have about 20 passes left,and have NEVER LEAKED.The OLD Phoenix slicks did not last as long and leaked,but not the NEW Phoenix slicks.I DON'T have clearance problems,68 camaro, with my stock rear wheel wells with the 9x30x15 tire as long as its not over 94 inches.http://i144.photobucket.com/albums/r...3/IMG_1493.jpg

Re: Phoenix slicks
 

Are those mounted on 10" wheels? and if so what is your back spacing and if its not too much trouble could you measure the sidewall or section width of those on the 10" wheels.I can only find specs of section width on 8" wheels.Thanks in advance Eric

Re: Phoenix slicks
 

Yes they are mounted on 10 inch wheels,with 4.5 inch back space and the section width is 13 inches with 12 psi in slick.






http://stevecoxracing.com