4th gen f-body 95 camaro manual brakes question
 

What do you guys run? I set mine up and I can't hardly stop the car. The pedal is very hard and you have to stand on it to stop the car?

Thanks,
Justen

Re: 4th gen f-body 95 camaro manual brakes question
 

Did you repositon where the rod attaches to the pedal to get the correct pedal ratio? Billingsley racing recomends the hole be 1 inch above the factory riviot that the stock rod attaches to. This is how I did mine and its been great.

Re: 4th gen f-body 95 camaro manual brakes question
 

I did that on a 77 Firebird. Rock solid until I moved the rod up 1 inch to the next hole.

Re: 4th gen f-body 95 camaro manual brakes question
 

The stock hole only provides about 4to1 pedal ratio. ....Moving about 1" to 1 1/4" inches gives about 6, 6 1/2 to 1 ratio. ......Tom

Re: 4th gen f-body 95 camaro manual brakes question
 

I moved it up 1 inch and then moved it back 1/2 inch because the angle looked way off on the pushrod.