CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Quadrajet HELP (https://classracer.com/classforum/showthread.php?t=17456)

Footbrake 05-02-2009 08:23 AM

Quadrajet HELP
 
First time out last night and it's stumbled bad out of the gate. I did nothing to it since last year. So I know the secondary air flap is set right. Did this all 3 time trials. Could the accelerater pump have gone bad over the winter? even at 50 mph it will stumble when I mash it.

Danny Ashley 05-02-2009 12:48 PM

Re: Quadrajet HELP
 
If your Q-Jet was dry over the winter and has a black pump cup, then yes , this could be your problem. You should replace it with one that has a blue cup such as the Edelbrock #1982. Danny

Danny Ashley 05-02-2009 12:51 PM

Re: Quadrajet HELP
 
Hey Al, I guess we were typing our replys at the same time. LOL. Danny

455 05-03-2009 10:00 AM

Re: Quadrajet HELP
 
You can also check the adaquacy of both primary shots from the accelerator pump as you manual move the throttle to confirm if the circuit is working or not.

njk53 05-03-2009 07:31 PM

Re: Quadrajet HELP
 
Where are you guys buying your parts for a Q-Jet?

Footbrake 05-04-2009 12:42 PM

Re: Quadrajet HELP
 
Overlooked a real simple thing right in front of my eyes. The little curved"S" shaped hose that goes from the vacuum port on the carb to the pull off was disconected. The way it was resting it looked like it was still on. Hooked it back up and no more stumble. Thanks for all the help anyway. the way it was acting I would have bet anything it was the acc. pump


All times are GMT -4. The time now is 08:36 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.