CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   4 Jet ? (https://classracer.com/classforum/showthread.php?t=11232)

Dennis Paz 06-06-2008 12:45 AM

4 Jet ?
 
Where should I start with jetting on my 4 jet 283 super stocker? sea level. Carb is currently been dialed in for denver and I have no clue where to start. Not going on dyno so any advice would be great.

Chuck Porter 06-06-2008 01:11 AM

Re: 4 Jet ?
 
Try 64 in the front and 66 in the rear as a starting point.. Are you using the lower air door? If so is it operable or locked open?
Chuck

OOPS! should have read the post closer - I ran a Stocker. I have no business commenting on a Super Stocker.
CP

james schaechter 06-06-2008 05:44 AM

Re: 4 Jet ?
 
Try talking to Dean Oliver. He is the master when it comes to SS and Stock 4GC's. I think it will be important to understand who prepped the carb or what has been done among other things. I run a stocker and generally stockers are jetted richer than SSers with the 4GCs. Hard to really answer without more specific info.

http://www.deanoscarbs.com/

CPOlesen 06-06-2008 12:08 PM

Re: 4 Jet ?
 
I moved from Colorado Springs to Oklahoma and when I arrived in Colorado i talked to some BB impala guys and all they did was put more timing in my motor. So when I got back I took some tming out and ran the same Jetting.


All times are GMT -4. The time now is 03:01 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.