Ladder bars for 1975 Vette, [C-3 body]
2 Attachment(s)
These photos show the "trunk" floor cut out and the OE rear assembly removed, which is the beginning of the of the process.
More progress soon. |
Re: Ladder bars for 1975 Vette, [C-3 body]
1 Attachment(s)
The "core"
' |
Re: Ladder bars for 1975 Vette, [C-3 body]
2 Attachment(s)
Moroso 28" front with Billet Specialties Street lite wheel at approximate ride height.
Moser 9" bare housing with overlength axle tubes. This allows installing the axle bearing ends in just the right place. The tables are my trusty, high milage, old, construction tables that have endured many builds. |
Re: Ladder bars for 1975 Vette, [C-3 body]
1 Attachment(s)
Ladder bars also require a properly setup front suspension.
|
Re: Ladder bars for 1975 Vette, [C-3 body]
2 Attachment(s)
Smooth, easy movement, plenty of travel, minimum bump steer and the proper stance.
|
Re: Ladder bars for 1975 Vette, [C-3 body]
Once the rear wheel wheels arrive the rear section work will begin. I want to be sure of the framework required for the Hoosier 30 x 10.5 radial. I think a sectioning/narrowing of the frame will be sufficient. The wheels will arrive in about two weeks.
|
Re: Ladder bars for 1975 Vette, [C-3 body]
1 Attachment(s)
The correct tire.
|
Re: Ladder bars for 1975 Vette, [C-3 body]
6 Attachment(s)
update photos
|
All times are GMT -4. The time now is 09:05 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.