CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Bracket Racing (https://classracer.com/classforum/forumdisplay.php?f=19)
-   -   383ci sbc (https://classracer.com/classforum/showthread.php?t=61943)

richie 2 04-20-2016 09:17 AM
383ci sbc
 
its tuff looking in there during assembly to see/measure the rod or rod bolt to camshaft lobe clearance...(scat h/beam rods and roller cam) any tips would help please/thankyou...

JCChildress 10-11-2016 04:54 PM
Re: 383ci sbc
 
Smaller base circle cam and stroker rods seem to work well for us but we still check. Its not easy but not that bad.

richie 2 10-20-2016 08:08 AM
Re: 383ci sbc
 
tks. JC. yes on the small base circle cam. now I'm finding it tight between counter weights and piston pin bosses...shooting for .060'' there.

Mike Rietow 05-31-2017 10:46 PM
Re: 383ci sbc
 
Quote:
Originally Posted by richie 2 (Post 501272)
its tuff looking in there during assembly to see/measure the rod or rod bolt to camshaft lobe clearance...(scat h/beam rods and roller cam) any tips would help please/thankyou...
Long tie wrap. Use it like a feeler guage, next go around.


All times are GMT -4. The time now is 07:45 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.