CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Wheel /tire info (https://classracer.com/classforum/showthread.php?t=72509)

Proline 03-17-2019 12:24 PM

Wheel /tire info
 
In the process of building a new 2002 Camaro stocker and wondering what size front tire and wheel width and backspace are most guys running with this car. Thanks

Mike Mans 03-18-2019 01:00 PM

Re: Wheel /tire info
 
Really a 27.5" front tire is as big as we can fit in the wheel well without major rubbing on the inner fender liner. We commonly run a 26" tire too, but depends on if you need bigger roll-out to slow down your reaction times at all. The MT has a narrower section width and fits nicely (Hoosier is similar). The wheel you want is the deeper (more) backspacing to pull the wheel back into the car. The spindle location on these cars is somewhat far outwards, so the more offset pulls it in to allow you to get the front end to sit a little lower.

Best of luck with the build,
Mike


All times are GMT -4. The time now is 11:41 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.