Trailer TMS question
Looking at tire monitor systems for a six wheel trailer. Lots of options here and my concern is the length of the sensor that screws to the valve stem. Seems to me it would be easy to "clip" one off the first time it rubs against anything because it hangs out so far. Anybody got around this?
|
Re: Trailer TMS question
|
Re: Trailer TMS question
Thanks Dan for the response and all of the overwhelming feedback from the other members on this site. I purchased a unit from Truck System Technologies, Model # 507SE from my local auto parts supplier. It comes with the "standard" sensors that screw onto the valve stems. Don't get the flow thru sensors because they are much longer and would be easy to brush off. The added length is 13/16" and if you remove the anti-theft feature it will only be 1/16" shorter.
|
Re: Trailer TMS question
You will like it. It takes all of the anxiety out of traveling. No more having to swerve to try and see the trailer tires. Enjoy.
Dan |
Re: Trailer TMS question
What distance will these transmit? I have a 28ft trailer with a 35ft toter. I have heard they will not transmit that far without some type of signal booster.
|
Re: Trailer TMS question
Quote:
|
All times are GMT -4. The time now is 03:23 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.