Pro trans help
Anyone with a pro trans what type of fluid and filter are you using?
|
Re: Pro trans help
Type F fluid...any brand is OK
If you tell make and model of trans I will try to give Filter PN. |
Re: Pro trans help
Its in an 83 Camaro with a 327. I just bought the car not sure about the trans. How can I tell what type it is. I was assuming it was a 350,
|
Re: Pro trans help
I took the pan off today and its a TH350. I can match up the gasket but the filter doesn't look like a normal 350 filter. Anyone have info on where to get a filter?
|
Re: Pro trans help
I use a mesh style filter on my 350's with a deep pan with a filter extension. I've used Type F and standard Dexron/Mercon and don't see any difference. Dexron is supposed to lube better and a 350 has a lot of bushings,washers and gears so the lubrication properties are important.
|
Re: Pro trans help
Lots of 350 deep pan deals use a Mopar filter with an adapter.
I really don't speak that language, but I I think it's a 904..If not a 727 ..One or the other. |
Re: Pro trans help
904 and 727 use the same filter. Pan gasket is different
|
Re: Pro trans help
Some use a bottom opening filter which I think is adapted from a 518 .
|
Re: Pro trans help
Do your filter and your trans a favor and put a couple of magnets in the pan. If it's an aluminum pan JB weld them in.
|
Re: Pro trans help
Thanks for all the help. It ended up being a filter from a 518. Great advice on the magnets too. I will definitely epoxy a couple to the bottom of the pan.
|
All times are GMT -4. The time now is 10:43 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.