CLASS RACER FORUM
Page 1 of 4 1 23 Last »
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   1966 Biscayne Build (https://classracer.com/classforum/showthread.php?t=50993)

PROSTREETBISCAYNE 12-23-2013 09:54 AM
1966 Biscayne Build
 
3 Attachment(s)
I've been putting this Biscayne together for the last 8 years. Finally on the last stage. My plan is to make it look like my father's 66 factory 427/425 Biscayne that he raced at National and West Hampton from 66 to 68. I bought it on ebay for $305 from Shelter Island.

PROSTREETBISCAYNE 12-23-2013 10:41 AM
Re: 1966 Biscayne Build
 
Chrome moly cage done at MTK Welding in Roselle NJ.

Glenn Hayes 12-23-2013 11:02 AM
Re: 1966 Biscayne Build
 
DO you have any still snap shots of your Dad's car that we can see?

PROSTREETBISCAYNE 12-23-2013 11:59 AM
Re: 1966 Biscayne Build
 
1 Attachment(s)
Quote:
Originally Posted by Glenn Hayes (Post 413568)
DO you have any still snap shots of your Dad's car that we can see?
I have a few. This one it's getting tuned at Motion by Joel Rosen and Bill Mitchell.

PROSTREETBISCAYNE 12-23-2013 12:03 PM
Re: 1966 Biscayne Build
 
1 Attachment(s)
1968

Glenn Hayes 12-23-2013 12:10 PM
Re: 1966 Biscayne Build
 
Quote:
Originally Posted by PROSTREETBISCAYNE (Post 413574)
I have a few. This one it's getting tuned at Motion by Joel Rosen and Bill Mitchell.
I known Bill for at least 30 years.... and his son Billy looks just like his Pops.

PROSTREETBISCAYNE 12-23-2013 01:15 PM
Re: 1966 Biscayne Build
 
3 Attachment(s)
Quote:
Originally Posted by Glenn Hayes (Post 413578)
I known Bill for at least 30 years.... and his son Billy looks just like his Pops.
Motion replaced the motor in 67. Bought new at Bast Chevrolet and was the first modified 427 Biscayne done by Motion.

PROSTREETBISCAYNE 12-23-2013 02:38 PM
Re: 1966 Biscayne Build
 
6 Attachment(s)
Quote:
Originally Posted by PROSTREETBISCAYNE (Post 413563)
Chrome moly cage done at MTK Welding in Roselle NJ.
full cage

PROSTREETBISCAYNE 12-23-2013 03:08 PM
Re: 1966 Biscayne Build
 
4 Attachment(s)
12 bolt, Strange axles with Ford ends. Moved the top attachment points on the rear up an inch and a half. Added a anti roll bar. Moved the rail in for 10.5 tires.

PROSTREETBISCAYNE 12-23-2013 03:18 PM
Re: 1966 Biscayne Build
 
4 Attachment(s)
Next stop Sano's Custom Paint n Dayton NJ


All times are GMT -4. The time now is 02:14 AM.
Page 1 of 4 1 23 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.