CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   transmission shield required is stock (https://classracer.com/classforum/showthread.php?t=68444)

GTS340 12-10-2017 01:15 PM

transmission shield required is stock
 
I see they either added it or I've been running without but I guess I need one now.

NHRA RULE AMMENDMENTS MADE FROM THE END OF THE 201
7
SEASON TO THE BEGINNING OF THE 201
8
SEASON
17
The use of air
assisted
or electric
assisted shift
er
is prohibited in all Stock
applications.
Deepene
d stock or aftermarket transmission oil
pans permitted.
Drilling of transmission case or rear of engine block to
adapt incompatible units
prohibited. Functional neutral safety switch
mandatory. Transmission brake
prohibited. Tailshaft modifications for
bus
hing replacement, or NHRA
-
accepted
aftermarket tailshaft,
permitted.
Any car running quicker than 10.99 must be
equipped with a transmission shield meeting SFI Spec 4.1. Any car running
quicker then 9.99, SFI 29.1 automatic transmission flexplate and SFI 3
0.1
flexplate shield mandatory.
See General Regulations 2:12, 2:14

DODGEBOY 12-10-2017 02:26 PM

Re: transmission shield required is stock
 
can you run a transmission blanket in a stocker thanks

Lyn Smith 12-10-2017 02:33 PM

Re: transmission shield required is stock
 
Does it say" deepened or aftermarket oil pans permitted"?

GTS340 12-10-2017 03:04 PM

Re: transmission shield required is stock
 
Sorry terrible job of copying it

Any car running quicker than 10.99 must be equipped with a transmission shield meeting SFI Spec 4.1. Any car running quicker then 9.99, SFI 29.1 automatic transmission flexplate and SFI 30.1 flexplate shield mandatory. See General Regulations 2:12, 2:14.

GTS340 12-10-2017 03:11 PM

Re: transmission shield required is stock
 
Quote:

Originally Posted by DODGEBOY (Post 551458)
can you run a transmission blanket in a stocker thanks

I asked Pat at NHRA the same question but didn't hear back. I would think so. I've tried the CSR on my old Super Stock car. Not user friendly at all. You end up cutting something to make it fit on a A-Body Mopar anyway. I've gone 440 B/SA in my Dart so I figure the CSR is worse with it. Scared to spend 500.00 to find out.

Cotten 12-10-2017 07:29 PM

Re: transmission shield required is stock
 
I've already put a blanket on my stocker.
I'll let you know after Pomona lol.

Floyd Staggs 12-10-2017 07:38 PM

Re: transmission shield required is stock
 
A steel shield is good for 5 years. A blanket is good for 2 years.

Rick Kolber 12-10-2017 08:27 PM

Re: transmission shield required is stock
 
Blanket fits so much better for my application and does meet 4.1 spec. unfortunately 2yr. deal.

MR DERBY CITY 12-10-2017 08:56 PM

Re: transmission shield required is stock
 
Quote:

Originally Posted by Rick Kolber (Post 551491)
Blanket fits so much better for my application and does meet 4.1 spec. unfortunately 2yr. deal.

Wow, Hopefully Santa can bring me a blanket every 2 years along with my new seat belts......

GTX JOHN 12-10-2017 09:37 PM

Re: transmission shield required is stock
 
Deep trans pans = Legal
Deep engine pans = NOT Legal


All times are GMT -4. The time now is 01:57 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.