LS Hydraulic Rollers
I'm in need of 12 of the Chevrolet GM Performance lifters for a V6 project.
Part # 88958689 All I've found is sets of 16 (Scoggins-Dickey, etc.) These could be take outs from a S/S engine, as long as they're new. Any ideas /suggestions? Thanks in advance. 602-769-0346 myac455@gmail.com |
Re: LS Hydraulic Rollers
Quote:
|
Re: LS Hydraulic Rollers
For...??? Wall ornaments?
Thanks for the btt |
Re: LS Hydraulic Rollers
Looks like a V/SA project.
|
Re: LS Hydraulic Rollers
Quote:
No, it's a 231 Buick. Same roller from the GM parts bin. |
Re: LS Hydraulic Rollers
Just an FYI , I have been rebuilding a 3800 for a Firebird street car and discovered that while the lifters look the same between the 3800 and the Chevy lifters , the pushrod seat is different . You will need about a .100 shorter pushrod if you use a Chevy lifter .
|
Re: LS Hydraulic Rollers
Quote:
I planned on new push rods too, ordered to the length I'll need, so we'll pick up on that, at that time. The checking lifter we have is from an LS build too, so should be all good. |
Re: LS Hydraulic Rollers
Still looking....
Question for the engine builders / COPO owners } Did all the LS COPO cars come with the close tolerance "bowtie" hyd. roller lifters ? How about the 2018 cars, now that the rule changed? I assume they are replaced with a solid roller for Super / Stock. |
Re: LS Hydraulic Rollers
Quote:
If you are looking for a good cheep LS lifter the Stock LS7’s are hard to beat for the price. I would be shocked if you can find only 12 just buy 16 and call it a day. |
Re: LS Hydraulic Rollers
https://zzperformance.com/3800/camsh...7-lifters.html
Mark, take a look at these. Rick Thomaosn GTOMayhem |
All times are GMT -4. The time now is 10:17 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.