WTB BBC Parts
 

WTB BBC Heads that end in casting 840, 291, 990, 026, 188 or 401 (aluminum) for a bracket motor. Complete or bare in good shape and can have minor porting. 2 or 4 bolt 427/454 blocks, cranks & rods etc... no sleeve replacement blocks.


Not looking for collector pieces.


Thx
Manny

Re: WTB BBC Parts
 

I think Kevin and I may have some stuff. We probably have a 0.060" or 0.070" over 454 two bolt main block with no sleeves, it is poured to the water pump holes, align bored, has lifter bushings, and main studs. We have some open chamber rectangle port heads from a boat, probably not 990 castings though. We're in TN.

Re: WTB BBC Parts
 

Package deal
4 bolt block, Std bore, arp main studs, I have align honed mains and decked to 9.780 with my BHJ system, all lifter bores are good, no sleeves, no grout and bores are good.
1 set of Top Stock prepared 401 heads from Ken Bugaj..
Ferrea and Manley valves dual springs (never hurt).
1 GM 19131359 intake (new un altered)
1 GM 3933163 intake
$4500

Re: WTB BBC Parts
 

I have a couple sets of 990 heads - where are you located?

Re: WTB BBC Parts
 

Phil PM sent

Re: WTB BBC Parts
 

how about bbc pontiac heads not hurt with jesel rockers also have sheet metal tunnel ram for these heads 4000

email: sagarth.espo@gmail.com

Re: WTB BBC Parts
 

PM Sent

Re: WTB BBC Parts
 

By chance do you have one stock 990 head? No porting, No cracks and bare.

Thanks for looking,

Re: WTB BBC Parts
 

Ron,
I will look through my cores, today. I might...

Re: WTB BBC Parts
 

Sorry Ron, I just checked, and I don't.