1978 Dodge Magnum stocker?
1 Attachment(s)
I love oddball combos, this might not be an oddball but I would like to get an opinion on if this is viable. Its heavy, can be run as a 2 brl or a 4brl with a intake /carb switch (same cam and heads for either). Wants a grand but probably can get it for 600 or so. IF I do pull the trigger, you can count on a post by post build up here. N/O/P as a 2brl, L/M/N as a 4brl.
|
Re: 1978 Dodge Magnum stocker?
1 Attachment(s)
Tried to make the picture bigger but I failed miserably.
|
Re: 1978 Dodge Magnum stocker?
With the 4bbl it's OK but the 2bbl would need about 20 HP back to be worth your while.
|
Re: 1978 Dodge Magnum stocker?
|
Re: 1978 Dodge Magnum stocker?
the 360 270hp is the way to go. It would run under the index cheap.
|
Re: 1978 Dodge Magnum stocker?
Listen to Paul Wong. Incidentally,do these cars have the long straight front torsion bars,or the removable front K member with the bent bars contained in it?
|
Re: 1978 Dodge Magnum stocker?
Just like the B Body.
|
Re: 1978 Dodge Magnum stocker?
Honestly I couldn't tell you Greg.
If I pull the trigger, this will be my first Mopar build so all the help/suggestions/honest know-how will be appreciated. If I do this, I will be using the 360/170/276 motor. Will the 904 bolt up? I'm inclined to think a 8 3/4 rear will be plenty? Long way off but Sox and Martin red, white and blue, or a simple Petty Blue? |
Re: 1978 Dodge Magnum stocker?
yes on the 900 series transmission.
yes on the 8 3/4,done correctly. red, white, and blue on the color. |
Re: 1978 Dodge Magnum stocker?
Not a wrench turned and you are already concerned about a paint job? Dream on.
|
All times are GMT -4. The time now is 04:56 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.