Re: 69 Camaro B/S
 

I have a pair of these now.

Re: 69 Camaro B/S
 

A friend of mine cut the mounts about 1 inch above the bottom mounting flange and welded them to the bottom of the Kirkey, then bolted the flange to a seat track.

Re: 69 Camaro B/S
 

While we're waiting on Todd to get out of paint shop prison I'll get a update in..

Seats are in.

I started fitting the interior.... The gauge cluster turned into a nightmare with the dash bar but after quite the modifications I was able to get it fit. Looks like the K&R switch panel is gonna fit nice in the radio spot .
https://i.imgur.com/hLat2wY.jpg

I ended up going with Aeromotive for the entire fuel system.
https://i.imgur.com/PbDvhTd.jpg
https://i.imgur.com/TKIuK91.jpg

Hopefully the weather breaks so I can roll it outside and paint the trunk and dash. Until then the radiator is ordered and on its way.

Re: 69 Camaro B/S
 

How wide are your kirkey seats? Did you have to make a custom bracket to attach them to the floor? Do you have any pictures? Thank You

Re: 69 Camaro B/S
 

17" wide. Ended up using 2X2 aluminum. Had to offset the bolt holes for the floor but it all worked.
The brackets bolted to the seat came from S&W. You should be able to get the idea from the pic I posted but I'll try to get a better one.

For what it's worth Rhodes race cars sells a nice bracket that bolts to the floor then bolt the seat to it but there like 150 each side.

Re: 69 Camaro B/S
 

I need to drive up to ART and get some of those carbon bar protectors. I also like the Aeromotive in-tank A1000. Coming together nicely!

Re: 69 Camaro B/S
 

Thanks Todd.

Radiators in. Champion was great to work with and charged $100 to add the an fittings. I have to redo the top hose. What's that saying, measure twice cut once lol

https://i.imgur.com/UeAIQzS.jpg

The clown that did the cage talked me into letting him build a wheelie bar. What a total POS!!!!! It was 10" to long, un sprung and so crooked and weak I probably would've wrecked if it hit.

Anyone in the new England area stay far away from Steve Oldham and Top Notch chassis prison in Freetown MA.

I gave Ken Keir a call and he got me situated. What a super nice piece, night and day from the $700 junk I was left with.

https://imgur.com/gallery/eiDxs

Re: 69 Camaro B/S
 

Re: 69 Camaro B/S
 

Thinking about the AutoPlumb adapters for the radiator so I don't have to mess with welding to the radiator.
https://autoplumb.com/collections/au...mostat-housing

Sent you a PM about the bars.

Re: 69 Camaro B/S
 

I saw the adapters but figured it was just another place to leak or have a problem. For the extra 100 I felt it was well worth it.. think I have 6 change into the rad, fans, shroud and fittings.....I set out to way over build the car in case I wanna go a different route some day but most importantly I want to lessen any chance of problems so I can drive it like I stole it...