CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Factory Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=50)
-   -   CJ torque convertor (https://classracer.com/classforum/showthread.php?t=70478)

StangJunkie 07-22-2018 09:40 AM

CJ torque convertor
 
Hello,
Does anyone know what stall they use in 2014 C4 Super Cobra Jet powered cars with 3.89 gears? I know they run 8inch Coan but what is its spec?
Thanks

Greenlight 09-17-2018 12:48 AM

Re: CJ torque convertor
 
The 2014 SCJ had TH400 transmissions.

I think they were built by Joel's on Joy, in Michigan and I believe the convertors were Coan.

JHeath 09-18-2018 06:40 PM

Re: CJ torque convertor
 
Call Coan and ask

RPM5595 10-03-2018 10:04 AM

Re: CJ torque convertor
 
Being out of the loop for awhile I have been mildly curious about what transmissions the CJ's are using? Did they ever use C4's or just TH400's and PG, err, 2 speeds?

JHeath 10-03-2018 09:26 PM

Re: CJ torque convertor
 
1 Attachment(s)
T400 like this

RPM5595 10-04-2018 10:26 AM

Re: CJ torque convertor
 
Quote:

Originally Posted by JHeath (Post 574238)
T400 like this

No kidding? So they have never used a C4? I'm going to use a C4 in my car until I can afford a "Man trans" someday. I'm hoping to get at least 40-50 runs between rebuilds. We'll see.

rawhide 10-04-2018 01:20 PM

Re: CJ torque convertor
 
some years had C-4's and some had C-2's (powerslide)

Roland

ALMACK 10-26-2018 09:27 AM

Re: CJ torque convertor
 
Quote:

Originally Posted by JHeath (Post 574238)
T400 like this

I believe that is code named 'C400"

james schaechter 12-01-2018 11:42 AM

Re: CJ torque convertor
 
Quote:

Originally Posted by RPM5595 (Post 574255)
No kidding? So they have never used a C4? I'm going to use a C4 in my car until I can afford a "Man trans" someday. I'm hoping to get at least 40-50 runs between rebuilds. We'll see.

You will get a lot more runs out of a basic Jerico or Gforce clutch combo.

Steve Stickel 12-01-2018 02:18 PM

Re: CJ torque convertor
 
Slightly off topic...

Anyone know of who makes a high stall (5000-6000 up ) converter for the 6R80 six speed trans used in the 11-14' Mustang GT? Can be with or without Lock-Up. TCI , Circle D , and FTI offer them but none above 4200 or smaller than 9.5"..

Spoke w/ Charlie at ATI, hasn't seen one yet .....


All times are GMT -4. The time now is 06:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.