CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Race Parts: Classifieds (https://classracer.com/classforum/forumdisplay.php?f=12)
-   -   stock super stock parts (https://classracer.com/classforum/showthread.php?t=4895)

Jim Hanig 12-24-2006 01:44 PM

stock super stock parts
 
2.18 low p/g 25 runs since freshend 650.00 4/7 swap roller for 396 ss 250.0 402-375 complete motor with 291 heads steel crank crower rods cp pistons subeck liter bored true decked and boredcomp cam big pan new oil pump .Never started 8500.0 or offer Also new set of 401 heads done at calverts. Ready to bolt on 3500.0 new intake also 300.0 Set of cower roller lifters s/b dyno time 250.0 set 1.6 used crne comp roller rockers 100.0 18* 4 barrel intake 200.0 s/b. 780 prc carb 450.00 Jessel rockers for s/b ford 1.8 1.6 missing 1 intake 500.0 Like new. stefs aluim pan for 289, 200.00 8 tci convertor for c4 6200 used 1 season 259.00.Every thing is open to offers as this stuff needs to go. Jim Hanig.


dahkahuna 12-24-2006 04:22 PM

Jim, please fill me in on whats been done to the 401 heads you have anything funny or are they factory? very interested but why havent they ever been used ,and are they a 2.19-1.88 valve head. who is calvert dont know this guy can I talk to him also?e-mail me dahkahuna@aol.com


dahkahuna 12-24-2006 04:27 PM

fill me in on what valves , springs, rertainer, keepers, seals, stud, guide plates, etc are with the heads. dahkahuna@aol.com


Stk4405 12-24-2006 06:40 PM

Interested in the transmission. Please send me more information about it(straight cut gears, transbrake, built by, internals) to Stk4405@aol.com or call 225-268-4044


Adger Smith 12-24-2006 06:56 PM

Wayne Calvert Precision Engs. (940) 382-6815. 220 Dallas Dr, Denton, TX
He is used by some very well know racers, with good results.

Jim,
Give me some info on : 18* 4 barrel intake 200.0
adgersperf@aol.com
903-794-7223 shop
Adger Smith

JOE B 12-25-2006 12:02 AM

intristed in the 289 pan .is it front sump ?


Jim Hanig 12-25-2006 04:43 PM

Joe, yes it is . has had some damage but still a good pan. Jim


Jim Hanig 12-25-2006 04:48 PM

4405, trans was built by Jimmy Aribe,few years ago gear set is tci dont know if its straight cut i hard rutland look it this summer. Then put in the an made 20 or so runs and it has a brake.


Jim Hanig 12-25-2006 04:53 PM

dahkuna far as i know nothing funny?? has been done to the heads they have manley vales kmotion springs and rets ,no studs or guide plates.AS to why they where no used , sold the car. j hanig


JOE B 12-25-2006 06:08 PM

WHAT KIND OF DAMAGE? CAN U EMAIL PHOTO?



All times are GMT -4. The time now is 10:16 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.