CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   EX IHRA Stocker What does my car fit at NHRA (https://classracer.com/classforum/showthread.php?t=68478)

Mark Yacavone 12-14-2017 12:51 PM

Re: EX IHRA Stocker What does my car fit at NHRA
 
68 car is very limited in Stock ,without spending a boatload of money to keep up.
As a SS/GT car, it doesn't need to be full tilt to run under the index.
69 full size 327, 1.250 2 bbl, 235 / 207 hp rating. GT/QA.
9" radials, stall it up good on the footbrake...Good to go... Half second under, no heads up runs
You're welcome..

Billy Nees 12-14-2017 01:17 PM

Re: EX IHRA Stocker What does my car fit at NHRA
 
Now, that would work!

Birch motor cars 01-11-2018 03:21 PM

Re: EX IHRA Stocker What does my car fit at NHRA
 
Thanks for all the replies, I have a lot to think about. Its just a pisser I have a complete (new) 350 330hp Legal engine sitting on the stand never fired, with no place to run it. :confused:

jmcarter 01-11-2018 03:28 PM

Re: EX IHRA Stocker What does my car fit at NHRA
 
Quote:

Originally Posted by Birch motor cars (Post 553495)
Thanks for all the replies, I have a lot to think about. Its just a pisser I have a complete (new) 350 330hp Legal engine sitting on the stand never fired, with no place to run it. :confused:

Association combo races and NMCA will give you a chance you know...

Chipper Chapman 01-11-2018 04:19 PM

Re: EX IHRA Stocker What does my car fit at NHRA
 
Quote:

Originally Posted by Birch motor cars (Post 553495)
Thanks for all the replies, I have a lot to think about. Its just a pisser I have a complete (new) 350 330hp Legal engine sitting on the stand never fired, with no place to run it. :confused:

The pistons in that engine should be the same for the 71-80 dished piston 350's. Buy some of the glamorous new dart castings allowed,sell the vortecs to recoupe, use your valves etc in them, good to go for a smog era motor, cheapest you'll get! lol The '71 350 2bbl is likely a good combo, 233hp with OE heads or 243 with replacement, the "big" 2 bbl carb, you'd fit in around GT/OA and have an 11.45 Index, at 3200 pounds with factory heads, 3330 with aftermarket. Go for it!

Billy Nees 01-11-2018 04:32 PM

Re: EX IHRA Stocker What does my car fit at NHRA
 
71 350 doesn't get the big 2bbl.

btrc 01-11-2018 05:36 PM

Re: EX IHRA Stocker What does my car fit at NHRA
 
Quote:

Originally Posted by Birch motor cars (Post 553495)
Thanks for all the replies, I have a lot to think about. Its just a pisser I have a complete (new) 350 330hp Legal engine sitting on the stand never fired, with no place to run it. :confused:

If you are from NW Iowa like it says under your name you can race it at most of the MCR combo races in your area. The only ones you can't I believe would be the ones that are also National Opens.

SSGN 01-13-2018 10:01 AM

Re: EX IHRA Stocker What does my car fit at NHRA
 
Would be a great 10.90 car and a lot cheaper to build/maintain. I see the Fletchers run the Nova in 10.90 lots, and then regular brackets etc. Just a thought.

Birch motor cars 01-19-2018 05:45 PM

Re: EX IHRA Stocker What does my car fit at NHRA
 
I have been told I can race for at least the next two years with my Crate Motor with the Midwest Class Racers. I think that's what Im going to do and start collecting parts for a Legal NHRA combo. :D

Birch motor cars 01-19-2018 05:55 PM

Re: EX IHRA Stocker What does my car fit at NHRA
 
Quote:

Originally Posted by Chipper Chapman (Post 553500)
The pistons in that engine should be the same for the 71-80 dished piston 350's. Buy some of the glamorous new dart castings allowed,sell the vortecs to recoupe, use your valves etc in them, good to go for a smog era motor, cheapest you'll get! lol The '71 350 2bbl is likely a good combo, 233hp with OE heads or 243 with replacement, the "big" 2 bbl carb, you'd fit in around GT/OA and have an 11.45 Index, at 3200 pounds with factory heads, 3330 with aftermarket. Go for it!

So, Chipper your saying I can use the motor I have and all I have to do is change the heads ? What intake and carb can I use ? Im assuming I can use the comp cam I have in the motor as well ?


All times are GMT -4. The time now is 02:56 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.