CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   hemi race carbs (https://classracer.com/classforum/showthread.php?t=36670)

63 savoy 10-16-2011 07:55 PM

hemi race carbs
 
anyone have a fix for constantly changing float settings in the holley 4236 and 4235 hemi cross ram carbs --it seems as though they will not hold a setting--tried different floats , seats etc.stumped--Mike

Paul Precht 10-16-2011 09:26 PM

Re: hemi race carbs
 
Just a thought but I'm thinking too much fuel pressure or faulty needle and seats.

Phillip marvetz 10-17-2011 02:10 AM

Re: hemi race carbs
 
I've had the same problem, It's not fuel pressure related.

63 savoy 10-17-2011 09:21 AM

Re: hemi race carbs
 
got a return fuel system at 6 #----I wonder if the angles where the float touches the needle are not quite right---you set the floats, make a pass, and then there is fuel everyplace---almost like the floats are getting heavy---somebody must have the fix for this---Mike

Ed Wright 10-17-2011 11:57 AM

Re: hemi race carbs
 
How are you setting the floats? With the sight plug in the side? I don't know too many racers that do that. Take the bowls off, turn them upside down, and use a drill bit for a gauge between the top of the bowl and top of the float. Most use either a 3/8" or 7/16" bit for a gauge. I think if you do that, then recheck them later you will find the float level is not changing, but that you have other problems.
What do you mean "fuel everywhere"? Fuel sloshing out the vents? That is not a float level changing problem. Try a 7/16" dril bit first. If the carbs are set front-to-rear, not cross ways, you will probably want to use a 3/8" on the rear bowls.

BlueOval Ralph 10-17-2011 01:17 PM

Re: hemi race carbs
 
These carbs are not center pivot float bowls (the 3/8 drill is fine for center pivot bowls) the Hemi float bowls are the side pivot bowls ( just like the old 660's or the Ford Holleys for the 427's) for side pivots start with a 5/16ths drill.
Ralph


Quote:

Originally Posted by Ed Wright (Post 288336)
How are you setting the floats? With the sight plug in the side? I don't know too many racers that do that. Take the bowls off, turn them upside down, and use a drill bit for a gauge between the top of the bowl and top of the float. Most use either a 3/8" or 7/16" bit for a gauge. I think if you do that, then recheck them later you will find the float level is not changing, but that you have other problems.
What do you mean "fuel everywhere"? Fuel sloshing out the vents? That is not a float level changing problem. Try a 7/16" dril bit first. If the carbs are set front-to-rear, not cross ways, you will probably want to use a 3/8" on the rear bowls.


63 savoy 10-17-2011 01:42 PM

Re: hemi race carbs
 
carbs are side hung 770 on hemi cross ram---they flood----set up is fuel(c 16) just dribbling out the sight holes with the engine running---seems like we have to constantly reset the floats--I see now why guys do not like to run these carbs---Mike

FED 387 10-17-2011 02:41 PM

Re: hemi race carbs
 
sent u a pm---FED387

FED 387 10-17-2011 02:51 PM

Re: hemi race carbs
 
sent u a 2nd PM this will fully explain what is happening---what is happening i is not what you think is happening !!! FED 387

Ed Wright 10-17-2011 02:55 PM

Re: hemi race carbs
 
Quote:

Originally Posted by BlueOval Ralph (Post 288355)
These carbs are not center pivot float bowls (the 3/8 drill is fine for center pivot bowls) the Hemi float bowls are the side pivot bowls ( just like the old 660's or the Ford Hooleys for the 427's) for side pivots start with a 5/16ths drill.
Ralph

Sorry! I stand corrected.

63 savoy 10-17-2011 03:22 PM

Re: hemi race carbs
 
Thanks fed 387 I think you have something there--going to try it--Mike

Dyno 10-17-2011 07:25 PM

Re: hemi race carbs
 
I run them on my S/S Hemi and have not had any problems, but I would like to know what may help. Please send me the "secret". thanks, Dyno

Phillip marvetz 10-18-2011 02:34 AM

Re: hemi race carbs
 
Quote:

Originally Posted by Dyno (Post 288424)
I run them on my S/S Hemi and have not had any problems, but I would like to know what may help. Please send me the "secret". thanks, Dyno

Me 2, lol

Chuck Beach 10-18-2011 11:25 AM

Re: hemi race carbs
 
Me 3 ...

Denny Dormaier 10-19-2011 12:34 AM

Re: hemi race carbs
 
Me 4


Thanks,
Denny

marfen 10-19-2011 01:03 AM

Re: hemi race carbs
 
Me too folks. These carbs have been driving me crazy for years. Been thru the ringer, warped carb bodies, floats that fill with gas (even on a brand new carb), the mysterious port behind the bowl on the early reissues that need to be plugged, etc. Hard on plugs, and intakes from the backfires. But when they work , wow!!

etoyman 12-11-2011 10:26 AM

Re: hemi race carbs
 
I'll add my name to the ME - 2 (#6) i beleive
any info on making these carbs work on a consistent basis
much appreciated
By the way does anyone here know or have conatct info on "Hemi George"
Thanks


All times are GMT -4. The time now is 06:32 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.